Description
Light up your Arduino and Raspberry Pi display needs with this high resolution, full colour OLED display module! Perfect for graphics, gauges, graphs, even make your own interactive display.
Features
- 16,384 full colour RGB pixels in a 128 x 128 format.
- Rear mounted MicroSD card, accessible directly on the Arduino.
- Active display area 28.8 x 26.8 mm, (1.5 inch diagonal.)
- Removable mounting tabs with “wings” where you can mount optional LEDs and buttons.
- Simple interface with Arduino compatible library, graphics and text functions plus examples.
Recommended Options
- OLED Shield LCD Adaptor for Eleven and compatible boards
- OLED Stick LCD Adaptor for LeoStick
- PiScreen LCD Adaptor for Raspberry Pi
Resources
- OLED128 QuickStart Guide for Arduino
- OLED 128 QuickStart Guide for Raspberry Pi
- OLED128 LED & switch wing guide
- FTOLED Arduino Library & FTOLED Wiki
- Hardware schematic PDF
- Dimensioned drawing PDF (original Inkscape SVG file)
- Controller datasheet (SSD1351)
- Design files
Specifications
| Power Supply Voltage (VCC) | 3.3V-5.5V. Recommended 5V. |
| Logic Input Voltage (logic pins) | 3.3V and 5V logic compatible (independent of VCC.) |
| Absolute Maximum Voltage | 7V (VCC or any digital input pin.) |
| Digital Output (MISO pin from Micro SD slot) | 3.3V logic. |
Power Consumption
Unlike LCD displays, OLED displays use less power the less pixels are lit up. Measurements taken with VCC = 5V, room temperature, default brightness and contrast settings.
| Display | Current Consumption | Power Consumption |
| All black | 4mA | 20mW |
| “fonts_demo” example sketch | 26mA | 130mW |
| “lorem_ipsum” example sketch | 72mA | 360mW |
| “sprite” example sketch | 7mA | 35mW |
| All white | 165mA | 825mW |
| All red | 99mA | 495mW |
| All green | 88mA | 440mW |
| All blue | 113mA | 565mW |
Examples
Reviews
There are no reviews yet.